Industrial endoscopes are widely used in aerospace, energy and power, automobile manufacturing, fine chemicals and other fields. Because they are an important tool for non-destructive testing, they must be well maintained and maintained in daily work.

1. Pay attention to the protection of lenses and probes: In the daily maintenance of industrial endoscopes, in addition to cleaning the lenses in time, be careful not to scratch the surface with sharp objects, otherwise it is easy to leave scratches or even cause the lens to break. When taking pictures and videos in some special environments, you can put a layer of things on the probe to protect it, reduce friction and ensure the clarity of the picture;

2. Handle with care to prevent damage: in the process of placing and taking the industrial endoscope, it should be handled with care. When picking up the front-end probe, it is best to place one hand under the probe to prevent accidental drop;

3. Avoid obstacles and damage the endoscope during the inspection process: During the inspection process, if you encounter obstacles, do not pull hard, you must find a way to continue in and out, and use force skillfully, otherwise the internal wiring, optical fibers, etc. may be damaged, affecting the clarity of the image degree and transmission of image signals;

4. Clean and keep it properly after use: After the industrial endoscope is used, wipe the relevant lines of the industrial endoscope with a clean and soft cloth, then re-tie it on the reel, and purchase the endoscope according to the order. When the standard packaging box is used, put each part in the designated position to ensure the next use;

5. The battery should be removed in time for protection: for electronic industrial endoscopes, the battery should be removed immediately after use, and the battery should be charged or replaced in time when the battery is exhausted;

6. Regular maintenance: Regular inspection, cleaning and maintenance of industrial endoscopes can detect the faults of endoscopes in time and take measures to deal with them, which is beneficial to prolong the service life of industrial endoscopes.